DIAK^® No. 1
FDA compliant. Scorchier than DIAK No.4. Good hot tensile, and excellent metal adhesion. Better c/s, physicals, and aging than DIAK No. 3.

          DIAK No. 3
Cheapest, non-FDA, and mold dirtying. Safer processing than DIAK No. 1.

          DIAK No. 4
Curing agent for fluoroelastomers. Particularly useful in B-type polymers for relatively safe processing and fast cures. Complies with FDA 21 CFR 177.2600.

          DIAK No. 7
Coagent for APA polymers; recommend using with VAROX DBPH-50.

          DIAK No. 8
DBPH-50 for all G types. Less scorchier than DIAK No. 7 with better mold filling, improved state of cure and c/s. Do not use with APA polymers.

          Viton^® Curative No. 20
Controls scorch, cure rate and cure time. Can be used to accelerate cure rate of curative containing polymers.

          Viton^® Curative No. 30
Controls state of cure, duro, modulus, elongation and compression set.

          Viton^® Curative No. 50
vs. VC 20/30, VC 50 provides: reduced mold fouling, faster cure without much loss in scorch, and decreased metal adhesion. Only bisphenol compliant with FDA applications.

          Viton^® VPA No. 1
In all molded goods for smooth performs, excellent mill and mold release.

          Viton^® VPA No. 2
Effective extrusion aid. Some adverse effect on high-temp compression set.

          Viton^® VPA No. 3
Provides best mold release. Best suited for automated part removal.