VANCIDE MZ-96 is an antimicrobial used to prevent mold growth on aqueous adhesive films. It can also be used as a fungicide in Neoprene compounds. For water-based systems, this product is also available in a convenient 50% active aqueous dispersion - VANCIDE MZ-96 Dispersion.

VANCIDE MZ-96 is zinc dimethyldithiocarbamate, a chemical known to act as an accelerator in various rubber polymers, such as neoprene and natural rubber. Please be certain evaluations have been performed in polymer systems prior to scale up to assure compatibility and fungi-resistance.

VANCIDE MZ-96 Dispersion is a convenient 50% active aqueous antimicrobial dispersion used to prevent mold growth on aqueous adhesives films and in other water-based systems.

VANCIDE 51 is recommended as a fungicide/preservative in aqueous adhesive systems. Easily incorporated into latex compounds.

R.T. Vanderbilt can supply a variety of products to meet your need for BIOCIDES in your Industrial applications.

VANCIDE MZ-96 - Registered for preservation of water-based paint films, adhesives, texture coatings, caulks, spackles, etc.

VANCIDE 51 - Registered for preservation of starch paste, cutting oils, mold resistant paper and paperboard, cotton fabrics and wood veneer.

VANCIDE MZ-96 is registered for preservation of water-based paint films, adhesives, texture coatings, caulks, spackles, etc. which might be used for:

• Indoors in bathrooms, kitchens and basement areas.
• Outdoors for paint, caulks, sealants and applications cured by heat.
• Other building products based on aqueous latex, i.e., adhesives.
• Dried adhesives and coatings which are reduced by water on-site.

VANCIDE MZ-96 Dispersion is a 50% aqueous dispersion of VANCIDE MZ-96 powder. Product has the handling advantages of a liquid for the same applications as above.

VANCIDE 51 is a tank-side additive for soluble cutting fluids and coolants. Effective in low concentrations for preventing spoilage and odor development due to bacteria. Use at concentrations of 0.05% to 0.10% (7 to 14 ounces/100 gal.) in diluted fluid depending upon the type of fluid and severity of the problem.

VANCIDE MZ-96 is compatible with high-heat processing (m.p. = 242°C minimum).

VANCIDE MZ-96 is zinc dimethyldithiocarbamate, a chemical known to act as an accelerator in various rubber polymers, such as neoprene and natural rubber. Please be certain evaluations have been performed in polymer systems prior to scale up to assure compatibility and fungi-resistance.

VANCIDE MZ-96 is an antimicrobial used to prevent mold growth on latex films. It can also be used as a fungicide in Neoprene compounds. For water-based systems, this product is also available in a convenient 50% active aqueous dispersion - VANCIDE MZ-96 Dispersion.

VANCIDE MZ-96 is zinc dimethyldithiocarbamate, a chemical known to act as an accelerator in various rubber polymers, such as neoprene and natural rubber. Please be certain evaluations have been performed in polymer systems prior to scale up to assure compatibility and fungi-resistance.

VANCIDE MZ-96 Dispersion is a convenient 50% active aqueous antimicrobial dispersion used to prevent mold growth on latex films and in other water-based systems.

VANCIDE 51 is recommended as a fungicide/preservative in aqueous adhesive systems. Easily incorporated into latex compounds.