Filler Minerals from R.T. Vanderbilt Company, Inc.

          BILT-PLATES^®156
In coatings such as primers, alkyd flats, and latex paints. Filler and extender for polymers and elastomers.

          DIXIE CLAY^®
Reinforcing filler and extender for all elastomers and latices. Used as a filler in non-black stocks and as an extender in black stocks. Reinforces and stiffens uncured and cured stocks. Controls shrinkage in adhesive compounds. Used in coatings, primers, crack fillers and caulking compounds.

          LANGFORD^® CLAY
Low cost inert filler for all elastomers. Used in non-black stocks of all types. Similar to McNAMEE^® CLAY, except for larger particle size, and lower color brightness.

          McNAMEE CLAY
Low cost reinforcer and inert filler for all elastomers. Used in non-black stocks of all types. Lighter color and increases modulus less than DIXIE CLAY.

          PAR^® CLAY
Reinforcer and inert filler for all elastorners. Used in non-black compounds of all types.

          PEERLESS^® 1 CLAY
An extender pigment in coatings, primers, crack fillers, and caulking compounds. Reinforcing agent and filler for elastomers.

          PYRAX^® A
Inert filler for natural, synthetic and latices where low moisture pick-up is required.

          PYRAX ABB
Diluent or carrier for agricultural toxicants. Inert filler and extender for NR and synthetic rubbers and latices for reducing volume costs and where low moisture pick-up is required.

          PYRAX WA
Gives maximum brightness of all the PYRAX products. Imparts “mud cracking” resistance to high-build coatings such as texture paints, block fillers, crack fillers and joint cement. Inert filler for natural, synthetic rubber and latices where low moisture pick-up is required.

          VANSIL^® W10
Functional filler in adhesives, abrasives, ceramics, elastomers, insulating materials, paint, plastics, resins, sealants, and wallboards.

          VANSIL W20
Functional filler in adhesives, abrasives, ceramics, elastomers, insulating materials, paint, plastics, resins, sealants, and wallboards.

          VANSIL W30
Functional filler in adhesives, abrasives, ceramics, elastomers, insulating materials, paint, plastics, resins, sealants, and wallboards.

          VANTALC^® 6H
Effective for gloss control, especially where film smoothness and pigment suspension are important. Filler for polypropylene, especially when good heat aging and retention of physical properties are important.

          VANTALC  F2003
Vantalc F-2003 is a high purity, platey talc to be used for effective stickies control in pulp and paper making. Also can be used as a reinforcing filler for plastics, rubber and paint.