VANLUBE RI-CSN Lubricant Additive - Neutral Calcium Dinonylnaphthalene Sulfonate Rust Inhibitor
VANLUBE RI-ZSN Lubricant Additive - Neutral Zinc Dinonylnaphthalene Sulfonate Rust Inhibitor
VANLUBE RI-BSN Lubricant Additive - Neutral Barium Dinonylnaphthalene Sulfonate Rust Inhibitor
VANLUBE® 0902 Lubricant Additive - Multifunctional Additive Package for High Performance Grease
VANLUBE® 0902 Lubricant Additive - Multifunctional Additive Package for Industrial Gear Oil
The AO Synergistic Effect of VANLUBE® 996E Antioxidant with VANLUBE BHC and VANLUBE 961 by PDSC
VANLUBE® W-324 Tungsten Lubricant Additive
VANLUBE® 972M Extreme Pressure Additive - Corrosion Inhibitor
VANLUBE® 915M Antioxidant
Stabilizing Water-Based Suspensions in Industrial Applications No.1235
ILSAC GF-5 Development - Better Late Than Never
VANLUBE® TK-132 Lubricant Additive
VANLUBE® 73 Super Plus Lubricant Additive
VANLUBE® BHC Phenolic Antioxidant
CUVAN® 303 Lubricant Additive
VANLUBE® EZ Lubricant Additive
VANLUBE® 289 Lubricant Additive
VANLUBE® 996E Ashless Antioxidant
VANLUBE® 0401 Lubricant Additive
Antiwear & Extreme Pressure Additives:
MOLYVAN L is an oil-soluble organic molybdenum additive containing sulfur and phosphorus. It functions as friction reducer, antioxidant, antiwear, and E.P. agent. It is used in engine oils, metalworking compositions and in a variety of industrial and auto-motive lubricating oils, greases and specialties. MOLYVAN L is an outstanding antiwear agent. It is quite useful in automotive and industrial gear oils and greases which operate under heavy load conditions.
Note: Since oil formulations vary it is recommended that upon the incorporation of any additive the finished product be tested to confirm original test results. In some formulations, the presence of MOLYVAN L may contribute to copper corrosion which would be detrimental to some diesel engines. Therefore, its use in such lubricants is not recommended.
Antiwear and EP additive for steel mill and other industrial gear oils. Antiwear and extreme pressure additive for petroleum oils and greases. VANLUBE 622 has outstanding extreme pres-sure and antiwear properties in a variety of base lubricants. It will give unusually high Timken, Falex, and 4-Ball EP values at economical concentrations of 1 to 3%. It shows promise as an EP and antiwear additive in automotive gear oils. Radioactive Ring Wear Tests in crankcase oils show VANLUBE 622 to be superior to zinc dithiophosphates at equivalent treating costs. Friction reducer in engine oils and gear oils.
An extreme pressure and antiwear additive for industrial lubricants, including lubricating oils, greases and synthetic fluids. Used as an extreme pressure and antiwear additive in various metalworking lubricants such as drawing, stamping and forming compounds. Improved EP performance of conventional extreme pressure materials such as sulfurized olefins, fatty oils, chlorinated paraffins, metal dithiocarbamates and phosphorodithioates. Effective in low concentrations as an antiwear additive in synthetic lubricants.
Used in nonmetallic industrial gear oils to give high load carrying properties. Extreme pressure and antiwear additive for lubricants based on petroleum oils and synthetics. VANLUBE 692 enhances the extreme pressure properties of sulfurized olefins, chlorinated paraffins, dithiocarba-mates and phosphorodithioates.
VANLUBE 719 was developed primarily for steel mill and similar industrial gear oils. It gives good extreme pressure and antiwear properties, good high temperature stability, and good demulsibility. VANLUBE 719 at a concentration range of 2 to 3% will meet the requirements of most steel mill gear oil specifications. It is applicable to 2-cycle engine oils.
Laboratory bench tests indicate the versatility of VANLUBE 727 as an additive for various types of automotive and industrial lubricating oils. VANLUBE 727 functions as an antiwear agent and antioxidant. The fact that it is nonmetallic makes it of interest for ashless or low-ash applications. Some suggested areas of application are: automotive engine oils, railroad diesel oils, compressor oils, gas engine oils, antiwear hydraulic and turbine oils, and various types of industrial oils. Bench tests indicate that the performance of VANLUBE 727 is competitive with that of commonly used zinc dithiophosphates. One percent in SAE 90 gear oil gives a 12-stage pass in the FZG test.
VANLUBE 7611M NSF® Certified: HX-2, 136048
VANLUBE 7611M is an organic liquid additive containing sulfur and phosphorus. 4-Ball Wear tests show VANLUBE 7611M, at 20 kg load, is equivalent to typical zinc dialkyldithiophosphates. At 40 kg load, it is superior to these products. VANLUBE 7611M will improve the antiwear properties of sulfurized extreme pressure additives. It is a useful component for EP/antiwear lubricant formulations and additive packages. VANLUBE 7611M does not contain metallic elements. Thus, it is applicable to ashless and low ash formulations.
VANLUBE 9123 NSF® Certified: HX-1, HX-2, 135575
Laboratory evaluations show VANLUBE 9123 to be an excellent antiwear additive and rust inhibitor in a wide range of industrial oils and lubricating greases. VANLUBE 9123 can be used at levels up to 0.5% mass to formulate food-grade products complying with 21 CFR section 178.3570, "Lubricants with Incidental Food Contact."
News & Articles
R.T. Vanderbilt Holding Company, Inc.
30 Winfield Street
Norwalk, CT 06856
For further information please fill out the request form: Petroleum Information Request