|
Now Online:
 Lubricant Additivesbrochure. VANLUBE RI-CSN Lubricant Additive - Neutral Calcium Dinonylnaphthalene Sulfonate Rust Inhibitor VANLUBE RI-ZSN Lubricant Additive - Neutral Zinc Dinonylnaphthalene Sulfonate Rust Inhibitor VANLUBE RI-BSN Lubricant Additive - Neutral Barium Dinonylnaphthalene Sulfonate Rust Inhibitor VANLUBE® 0902 Lubricant Additive - Multifunctional Additive Package for High Performance Grease VANLUBE® 0902 Lubricant Additive - Multifunctional Additive Package for Industrial Gear Oil The AO Synergistic Effect of VANLUBE® 996E Antioxidant with VANLUBE BHC and VANLUBE 961 by PDSC VANLUBE® W-324 Tungsten Lubricant Additive VANLUBE® 972M Extreme Pressure Additive - Corrosion Inhibitor VANLUBE® 915M Antioxidant Stabilizing Water-Based Suspensions in Industrial Applications No.1235 ILSAC GF-5 Development - Better Late Than Never VANLUBE® TK-132 Lubricant Additive VANLUBE® 73 Super Plus Lubricant Additive VANLUBE® BHC Phenolic Antioxidant CUVAN® 303 Lubricant Additive VANLUBE® EZ Lubricant Additive VANLUBE® 289 Lubricant Additive VANLUBE® 996E Ashless Antioxidant VANLUBE® 0401 Lubricant Additive |
Antiwear & Extreme Pressure Additives: Polysulfides  TPS and VPS Anti-wear and Extreme Pressure Additives Product Overview   SPS™ 10 LSSPS 10 LS is highly water-soluble polysulfide designed for use as extreme pressure additive in synthetic and semi-synthetic metal-working fluids. It is also recommended for use in aqeuous based lubricants. SPS 10 LS contains 10% inactive sulfur and is non-staining to copper and aluminum. It is non-foaming, odorless and stable at alkaline pH's; and it does not promote bacterial growth.  TPS™ 20TPS 20 is di-tert-dodecyl polysulfide used as an antiwear and extreme pressure additive in applications where inactive sulfur is required. It is recommended for metalworking fluids that are used in the machining and forming of ferrous and non-ferrous metals. TPS 20 is odorless and thus, it is especially suited for use in rolling oils. It is also an effective sulfur source for formulating automotive and industrial lubricants and greases. TPS 32TPS 32 is di-tert-dodecyl polysulfide with a high active sulfur content. It is a light colored and low odor extreme pressure additive designed for metalworking fluids used in the machining and forming of ferrous metals. TPS 32 is recommended for semi-synthetic metalworking fluids and can be used to formulate industrial and automotive greases. TPS 37 LSTPS 37 LS is di-tert-nonyl polysulfide with high active sulfur content. It is a light colored and low odor extreme pressure additive designed for metalworking fluids used in the machining and forming of ferrous metals. TPS 37 LS is recommended for semi-synthetic metalworking fluids and can be used to formulate industrial and automotive greases. TPS 44TPS 44 is di-tert-butyl polysulfide used in formulation of industrial and automotive gear oils and greases. It is cost effective source of thermally stable sulfur that provides good load-carrying and antiwear properties to applications where inactive sulfur is required. VPS™ 15VPS 15 is polysulfide derived from vegetable based fatty acid esters. It is a light colored product composed of inactive sulfur. VPS 15 is an effective lubricity, antiwear and extreme pressure additive recommended for use in ferrous and non-ferrous metalworking applications. It is recommended for semi-synthetic metalworking fluids and can be used to formulate industrial and automotive lubricants and greases. TPS and VPS are trademarks of Arkema, Inc. |
 AntioxidantsAntiwear &Extreme Pressure Additives IndustrialPreservatives Metal DeactivatorsFriction ReducersChemicalIntermediates Rust InhibitorsOther ProductsNow OnlineRelated Petroleum ResearchNews & Articles Petroleum ApplicationsLaboratory Petroleum OrganicResearch Laboratory IndustryMeetings InformationRequest PetroleumArchive |
|
R.T. Vanderbilt Holding Company, Inc. 30 Winfield Street Norwalk, CT 06856 800.243.6064 For further information please fill out the request form: Petroleum Information Request fax:203.853.1452 |